Applying Wallpaper

10 Wallpaper Tips – How to Wallpaper a Room

Does your home have dated wallpaper that you would love to update? Or maybe you’re thinking of adding wallpaper to a room for the first time and don’t know where to start. Either way, this guide will show you how to wallpaper a room from start to finish. Keep reading for step-by-step instructions, as well as helpful tips and tricks.

How to wallpaper a room?

Below are some actionable tips for applying wallpaper to your room without any issues.

1. Gather Your Supplies

Before you begin, ensure you have all the supplies you’ll need. You’ll need wallpaper, wallpaper adhesive, a utility knife, a straight edge, a sponge, and a bucket. You may also need reinforcement strips if you’re planning on hanging heavy-duty or textured wallpaper.

2. Prep the Walls

Start by giving your walls a good cleaning with mild soap and water. Then, fill any holes or cracks with spackle or joint compound. Once the walls are dry, use sandpaper to smooth out any remaining imperfections.

3. Measure the Walls

Use a tape measure to determine how much wallpaper you’ll need to purchase. Be sure to account for pattern repeats (if applicable) when making your calculations. 

4. Cut the Wallpaper Pieces

Once you have your measurements, cut the pieces of wallpaper to size using a sharp utility knife and straight edge. Cut reinforcement strips to length if you work with heavy-duty or textured wallpaper. 

5. Apply Adhesive 

Using a roller or brush, apply an even layer of adhesive onto the back of each piece of wallpaper. Be sure not to apply too much glue, as this can cause problems later. If you’re working with heavy-duty or textured wallpaper, also apply adhesive to the reinforcement strips at this time.

6. Hang the Wallpaper Pieces

Starting in the corner of the room, align one piece of wallpaper with the ceiling and side wall (or trim, if applicable). Use a Sponge dipped in water to gently smooth out any bubbles or creases as you go along. Continue until all pieces of wallpaper are hung.

7. Apply Reinforcement Strips (if applicable)

If you’re working with heavy-duty or textured paper that requires reinforcement strips, it is time to apply them according to the manufacturer’s instructions.

8. Trim Excess Paper

Once all pieces of wallpaper are hung and dry, use a sharp utility knife and straight edge to trim away any excess paper along the seams where the two pieces meet up. Be extra careful not to go overboard here – it’s always better to err on the side of caution!

9. Enjoy Your New Room!

Now stand back and admire your handiwork! With these easy-to-follow steps, you can easily update any room in your home with new wallpaper – no professional help required!

10. Bonus Tip: 

Remove Wallpaper Later On down the road and want to remove your wallpaper? No problem! Just score the surface of each piece using a scoring tool designed specifically for eliminating wallpaper (available at most hardware stores). Then, soak each piece in warm water for 5-10 minutes before carefully peeling it away from the wall surface.” 


Updating your home’s decor with new wallpaper is easier than you might think – follow these simple steps, and you’ll have pro-level results in no time!

For Quality Home Wallpaper services, you can hire the best interior solution providers like Curtain Mart in your area. They will provide you with a colour and material selection of wallpaper. 

Leave a Comment

Your email address will not be published. Required fields are marked *